Garage Defender Installation Fixing Kit

Description

The Garage Defender Installation Fixing Kit is a pack of fixings and drill bits for installing the Ultimate Garage Defender and Ultimate Garage Defender Master. The kit contains an additional bolt, an Allen key and two masonry drill bits (10mm and 16mm) to accompany the fixings provided with the main Garage Defender plates.

The Garage Defender Installation Fixing Kit is supplied by SAS and is intended to supplement the fixing holes present on the Garage Defender plates. The kit supplies a third bolt where the plate has three fixing holes while standard Garage Defender models are supplied with two bolts.

Additional Info:

The ultimate garage defender fixing kit for fitting the ultimate garage defender products. This kit is for installing the ultimate garage defender and ultimate garage defender master. The kit includes: 1 x extra bolt 1 x Allen key 2 x masonry drill bits at 10mm and 16mm The additional bolt is included for extra security when fixing down the plate.

As standard both models come with 2 bolts whereas the plate has 3 fixing holes. For that additional peace of mind, the 3rd bolt is supplied here.

The bolts are screwed down into the concrete holes using the Allen key in this kit. 2 drill bits are supplied in this kit, the first one 10mm and the second 16mm. The bolt holes in the concrete need to be drilled with the 16mm drill bit for a final fit, the 10mm bit is supplied for a pilot hole. You will require a drill to use the drill bits in addition to this kit. Full installation instructions are provided within the ultimate garage defender kits.

• Key Features
• Contents: 1 extra bolt, 1 Allen key, 1 x 10mm masonry drill bit, 1 x 16mm masonry drill bit.
• Application note: the 10mm drill bit is for a pilot hole; the 16mm drill bit is for the final hole in concrete.
• Fastening method: bolts are driven into the concrete holes and tightened using the supplied Allen key.
• Brand: SAS.
• Category: Garage Door Additional Security and Spares, Fixings.

• Fitment & What to Check
• Check the Garage Defender plate to confirm it has three fixing holes if a third bolt is required.
• Confirm concrete substrate depth and condition to accept a 16mm final hole.
• Confirm a suitable powered drill is available to use the supplied masonry drill bits.
• Verify the Allen key fits the bolt heads on the supplied bolts and the plate bolts.

• Common Ordering Mistakes
• Assuming the kit contains the full set of plate bolts rather than one additional bolt.
• Not having a compatible drill to use the masonry drill bits.
• Not checking concrete depth or reinforcement before drilling 16mm holes.